Art 2021

2021 L2 Engineering Hydraulics Tools

 What are hydraulic tools?

Hydraulic tools powered tools that use pressurized fluid to operate the hydraulic machines. The fluid moves through tubes and into the tool's actuator, where the pressure stored in the fluid is transferred to the moving parts.

Different types of hydraulic power tools?
Hydraulic Riveters.
Hydraulic Pullers.
Hydraulic Pushers.
Hydraulic Presses.
Hydraulic Pumps & Cylinders.
Hydraulic Hoses & Accessories.
Hydraulic Motors.

How do they work?

Hydraulics uses a pump to pressurize hydraulic fluids compressing using a jack and lifting them up, allowing the jack to hold something up, under the pressure.

What safety precautions do you need to take

You must wear the correct PPE when you are using or around hydraulics like safety glasses, ear muffs, and covered footwear.

How do you maintain them? 

Brush and wipe clean all hydraulic connections before you insert them into a hydraulic pump or remote head. Always use fiber brushes when cleaning your hydraulic tools—never metal-bristled brushes.

Safety when using Power tools

SAFE USE OF  MAINS POWERED TOOLS AND EXTENSION CORDS 

Describe/ Explain what is a mains powered power tool.

A mains power tool is a tool that can only be powered using a cable that is plugged into a wall. And is much quicker than a battery-powered tool because you don't have to wait for the battery to charge.

Where are you likely to use it?

You are most likely to use these tools in your workplace or at home.

Give 3 examples of a mains power tool you may have already used. 

Power Drill

Band Saw

Biscuit Joiner

Describe/explain the task you used it for.

Band Saw - I used the band saw to cut material to the correct shape and size.

Power drill - I used a power drill to create holes in the material and insert screws

Biscuit joiner - The biscuit joiner was used to create a biscuit-shaped hole to fit in a biscuit piece.

General safety around electricity. 

What to look for….

• Never put fingers or other objects in an outlet.
• Never use anything with a cord or plug around water.
• Never pull a plug out by its cord.

 General hazards and dangers of mains powered power tool

Falling, flying, and splashing objects or harmful dust, fumes, vapors, or gases must be provided with the appropriate PPE.

What is meant by “RCD” Why is it important?

An RCD is a sensitive safety device that switches off electricity automatically if there is a fault.

What is meant by “Double Insulation” Why is it important?

Double insulation is another method of protection against electric shock, it is an extra layer of insulation over the basic insulation.

Hazards and dangers of extension cords

It could get in the way of other people around you and it is a tripping hazard.

Safe Use of extension cords

• Avoid powering multiple appliances with one cord.
• Never use indoor extension cords outdoors.
• Don't plug multiple cords together.
• Don't run extension cords under rugs or furniture.

General PPE when using mains-powered tools 

Art Mood board

 

How to use Air tools safely

1. What are Pneumatic tools/ air compressors? A pneumatic tool or air-powered tool is a type of power tool that is powered by compressed air. The compressed air comes from an air compressor.

2. Safety when using an air compressor. Before each use of the air compressor perform a safety check. Always wear eye and hearing protection when operating. When using the air compressor never point it at yourself or anyone because this can lead to serious injury or death.

3. PPE when using air tools. When using air tools you must always wear the right PPE to be safe. The correct PPE is safety glasses or a face shield and hearing protection to make sure no compressed air can get on your face or eyes.

4. Different types of air tool connections.  

5. Specific safety for tools

• Impact driver - Never wear a tie, loose clothing, or jewelry like rings when using an impact driver. Wear hearing protection when using this tool.
• Air ratchet -  Always wear safety glasses with side protectors when using.
• Dust off gun - Never point it at someone or yourself and always wear safety glasses.
• Air riveter - Never point an air riveter toward anyone, wear safety glasses and hearing protection.

My Identity English Assessment

1. The type of visual text I am going to create is a comic strip.

2. I am going to base my static image on my identity.

3. The images I am going to use are my own that I have created using pixton.

4. I am going to use these images because they show my life in a comic

5. I am going to use this because it is the best and most accurate.

    

English (Formal Persuasive Writing)

Is school the best place to make mistakes?

Without mistakes, you won’t succeed.

Mistakes help you get better at stuff, Mistakes won’t hurt as much as they hurt in real life, You can bounce back and learn from your mistakes, It is good to make mistakes, It is normal to make mistakes.

School is a time for teenagers to transition from childhood to adulthood, and mistakes will help them get there.

For instance, by making a mistake it is actually good in a way because it teaches you what not to do next time. It is not normal if you don’t make mistakes, Because everyone makes mistakes.

School needs to be a place that doesn't just teach the right answers; it should also be a place that teaches kids how to bounce back from failure. If they make mistakes, those mistakes won't hurt them as they would in real life. So If you make a mistake it is ok, because you can learn from it and mistakes help you succeed. 

Not only do mistakes help you learn, but they will also prepare you for your adulthood. By making mistakes you will know what is right and wrong, and you will make sure you won’t make that mistake again.

This shows that mistakes are just part of life and that everyone makes mistakes in life whether it be a small or big mistake.

But making too many mistakes at school can be bad because you could fail. 

By making too many mistakes at school or anywhere can lead to you failing or even worse like getting injured or even killed. For example, if you work at a construction site you could make a mistake and get injured. 

If you are struggling with something and you make a mistake you might not learn from these mistakes and fail.